Skip to main content Skip to site utility navigation Skip to main site navigation Skip to site search Skip to footer
Menu

Power Engineering Technology

Prepare to meet technical demands and take responsibility for the safe and efficient operation of a variety of plant and building systems.

A man in a blue NSCC shirt and yellow NSCC hard hat stands in front of a large piece of equipment and writes on a clipboard.
Start Date:
September
Typical Length:
2 Years
Credential:
Diploma

Apply Now

Overview

Breweries, dairies, refineries, thermal generating stations, pulp and paper plants, hospitals, universities, rinks and refrigeration plants – these are just some of the major industries that rely on a Power Engineer to safely operate and maintain their power equipment.

Your training in this field prepares you for the technical demands of, and responsibility for, the safe and efficient operation of a wide variety of facilities: power, high- and low-pressure steam systems, refrigeration, natural gas and air compressor plants.

Work experience

  • Field experience is a mandatory credit course, providing you with the opportunity to apply your knowledge and skills outside of the classroom.
    • Opportunities are typically unpaid and last approximately 5 weeks.
  • This program is eligible for an optional cooperative education (co-op) credit course between year one and two.
    • Co-op provides an opportunity for paid, full-time employment in a field related to your program.
    • Co-op takes place in third term and must be a minimum of 12 weeks and 420 hours.
    • Our co-op program follows Co-operative Education and Work-Integrated Learning Canada (CEWIL) guidelines.
  • Transportation, accommodations and other costs related to work experience are your responsibility.
  • For more information, visit work experience opportunities.

Other info

  • Requirements for eligibility to write the Nova Scotia Department of Labour and Advanced Education Technical Safety Division 3rd and 4th class examinations:
  • This program places a high importance on providing you with skills and knowledge to work safely in industry. To prepare for employment you participate in safety awareness courses.
  • Industrial safety standards require that you have adequate vision and colour perception to operate safely, in the shop and in the occupational field, while performing tasks of the trade.
  • Many employers in this industry require a current, official criminal record check as part of the hiring process. A conviction on your criminal record may impact your ability to secure employment.

September 2025

Campus Full time/part time Delivery Availability
Akerley Campus
Dartmouth
Full time In person
Delivered in-person. Some courses may have online elements.
Seats available
Strait Area Campus
Port Hawkesbury
Full time In person
Delivered in-person. Some courses may have online elements.
Seats available

Admission requirements

  • High School Graduation Diploma or equivalent, including Academic Grade 12 Math and Academic Grade 11 Physics.
  • Advanced standing – Students who have achieved Power Engineer 4th Class certification are eligible for advanced standing. To be considered, you must apply to and meet the admission requirements for the Power Engineering Technology program. Advanced standing is based on academic credits (certificate/diploma/ degree/industry certification) completed from a recognized public institution within the past ten years that meet the academic requirements of the full first year of the program. Advanced standing is subject to seat availability.
  • If you do not have the required academic credits, NSCC offers a variety of credit courses through the Academic and Career Connections program.

Program requirements

  • Portfolio development – As part of your studies at NSCC, you develop a portfolio of your work; the portfolio captures your achievements and profiles your skills to employers.

Tuition

Tuition amounts are for the 2024-25 academic year. Program costs and fees (textbooks, supplies, etc.) are additional.

Tuition (Domestic):
$3,620
Tuition (International):
$11,690

Tuition, fees and program costs

In addition to annual tuition, there are program costs (books, tools, etc.) and student fees for College services, health and dental plans, your student association and parking.

View detailed program fees page(s). Please note that amounts on these pages are meant for planning purposes only. They don't represent final amounts owing.

Career options

  • After successfully achieving Nova Scotia Department of Labour and Advanced Education Technical Safety Division certification, graduates find employment in various boiler plants, thermal power generating stations, processing plants, pulp and paper plants, oil refineries, breweries, industrial plants, as well as heating and air conditioning plants found in hospitals, universities and schools.
  • This program includes courses that can be applied towards a career in the Canadian Armed Forces as a marine technician. Visit browse careers
  • Learn more about labour market information. View career options

Future study options

Courses may include

These are some of the courses offered in this program. It is not a complete list and courses are subject to change in advance of the academic year.

Recognizing prior learning / transfer credits
If you have previous learning (course, employment, etc...) that's relevant to your program, you may be able to apply to earn credit. Not all programs are eligible. Learn about our recognizing prior learning (RPL) process.

COMM 2245 - Technical Communications II
This course focuses on the interpersonal, written and oral technical communication skills necessary for working independently and as part of a team in a technical environment. Further skill development in written forms of technical documentation required for the workplace as well as report creation and oral presentation skills will continue to be emphasized. Team building principles, group dynamics and collaborative writing will be discussed. Students will participate in meetings and take responsibilities in a group project from its inception to completion and evaluation. Students will continue to enhance and apply their research skills and project management principles will also be introduced. Successful job interviews and the portfolio will be discussed.

PETG 1008 - Power Operations and Maintenance Lab I
Learners will have the opportunity to perform lab projects while safely being introduced to a variety of hand tools. Plant maintenance and equipment tasks such as gauge glass replacement, flue gas analysis and various piping procedures will be carried out. This course will provide the learner with a basis for safety and environmental awareness of power plant and boiler operation. Learners will experience startup and shutdown of a firetube boiler with emphasis on operation of equipment and their functions in the plant cycle. Logging of plant parameters will be carried out.

PETG 1066 - Prime Movers, Lube, Maintenance
This course presents the fundamentals of operation and proper care of steam driven equipment, pumps, compressors and internal combustion engines. The learner will become knowledgeable in the areas of steam engine, steam turbine, pump and compressor startup and shutdown. The need for good maintenance practices, lubrication and lay-up of equipment is also presented so the equipment will operate trouble-free.

PETG 1067 - Math, Mechanics and Thermodynamics
This course includes a review of basic applied mathematics with an introduction to the physical sciences, applied mechanics and thermodynamics. The learners will perform arithmetic operations involving metric conversions, integers, fractions, decimals and per cent, areas, volumes, ratios and proportions. Mechanics introduces the learner to the theory and calculations relative to work, power, energy, mechanical advantage, vectors, velocity and acceleration, forces, pressure, friction, stress and strain, and power transmission. Thermodynamics examines the nature and conversion of heat. Topics include the thermodynamic laws, temperature measuring devices, change of state, properties of steam including an introduction to the steam tables.

PETG 1070 - Power Operations and Maintenance Lab II
Learners will have the opportunity to perform lab projects while safely being introduced to a variety of hand and power tools. Plant maintenance and equipment tasks such as gasket making, valve and steam trap maintenance are performed along with a variety of lab operations. Learners will also be required to practice lockout procedures for equipment and components in accordance with Nova Scotia provincial regulations. This course will provide the learner with safety and environmental awareness of power plant and boiler operation. Learners will experience startup and shutdown of condensing and non-condensing turbines along with auxiliary components in the operation of turbines. Remote start up, operation and shut down are also covered in this lab.

PETG 1072 - Electricity, Instrumentation, Plants
This course covers the fundamentals of electricity from types of current to distribution systems, as well as instrumentation controls, computer applications and process plants (gas, oil, pulp). Learners will gain knowledge needed to comprehend instrument and controls that are an integral part of these plants.

PETG 1074 - Refrigeration and Air Conditioning
This course examines equipment, fittings and controls for vapour compression and absorption refrigeration systems. The learner will learn startup, operation, shutdown and maintenance requirements for industrial and air conditioning applications.

PETG 1075 - Power Operations and Maintenance Lab III
Learners will perform lab projects while utilizing plant maintenance and equipment procedures such as repair and replacement of equipment components. Wet lay-up procedures are described and carried out in the lab environment. This course will provide the learner with a continuation of safety and environmental awareness of power plant and boiler operation. Learners will experience boilers/controls, steam condensate, pumps, pressure valves and boiler operations.

PETG 1076 - Applied Mechanics
This course examines mathematical concepts including algebraic operations, logarithms, trigonometry and problem solving. Mechanics investigates problems including forces and friction, work, power, and energy, linear and angular motion, strength of materials, bending of beams, simple machines, pressure, density, and flow. Learners will enhance their skills and knowledge base used to solve problems encountered in power plant operation.

PETG 1077 - Thermodynamics and Applied Science
Thermodynamics is the branch of physics that deals with heat and the conversion of heat into other forms of energy or visa versa. The power engineer is involved in heat transfer in many ways: the burning of fuel in a boiler to change water to steam, the burning of fuel in an internal combustion engine or even the withdrawal of heat from a substance to be cooled as in the case of refrigeration. Applied sciences include the fundamental principles of chemistry, the applications and developments of materials and the formation and methods of corrosion control.

PETG 1078 - Safety, Codes, Combustion, Piping
Pursuant to the certificate level program, this course examines industrial legislation including codes, acts and regulations related to Power Engineering. Fuels, combustion and flue gas analysis are covered. Piping systems, steam traps and separators as well as valves and actuators are also examined. Occupational Health and Safety, WHMIS and fire protection are also included in this course. The learner should be able to enhance their skills and knowledge base used in routine power plant operation and maintenance.

PETG 1079 - Electrotechnology
This course examines electrical theory and circuits, AC and DC machines, safety, systems and switchgear. Instrumentation investigates measurement and control of pressure, temperature, level and flow as applied to power plants. Various control systems and strategies are also covered.

PETG 1081 - Power Operations and Maintenance Lab IV
Learners will perform various lab projects while utilizing plant maintenance and equipment procedures such as fire tube boilers, feed water systems, steam turbines and auxiliary equipment. This course will provide the learner with a continuation of safety and environmental awareness of power plant and boiler operation. Learners will experience boilers/controls, steam condensate, pumps, pressure valves and boiler operations.

PETG 1082 - Boilers
This course examines details of watertube boiler design, construction and heat transfer components. High-pressure boiler fittings, burner systems, draft and flue gas equipment, and boiler control systems are included in this course. Learners should be able to enhance their skills and knowledge base in routine boiler operation.

PETG 1083 - Boiler Operations, Water Treatment, Pumps, Welding
This course examines details of boiler commissioning, operation, lay-up, cleaning and water treatment. Power plant pumps, welding, and construction of pressure vessels are included in this course. Learners should be able to enhance their skills and knowledge base in routine operation and maintenance of high-pressure steam plants.

PETG 1084 - Prime Movers
Pursuant to the certificate level program, this course examines construction and operation details of the steam turbine and auxiliaries. The gas turbine and internal combustion engine as well as methods of cogeneration are included in this course. Learners should be able to enhance their skills and knowledge base in routine operation of steam turbines and other prime movers.

PETG 1085 - Air Compression, Refrigeration, Auxiliary Systems
Pursuant to the certificate level program, this course examines construction, operation and maintenance details of positive displacement and dynamic air compressors. The construction and operation of vapor-compression, centrifugal and absorption refrigeration systems are included in this course. Lubrication principles, construction and maintenance of bearings are also covered. The learner should be able to enhance their skills and knowledge base in routine operation of auxiliary power plant systems.

PETG 1086 - Work Experience II
The work experience component provides the learner with an opportunity to apply 3rd class Power Engineering skills and concepts appropriate for entry level positions within the occupation. Learners will assess their own performance and be evaluated by an industry partner. Learners will identify personal outcomes they wish to attain during the work experience and will keep a journal.

PETG 1087 - High Pressure Boilers I
This course presents the fundamentals of boiler design types, construction, fittings, combustion, as well as operational fundamentals. Additionally, the learner is introduced to welding equipment and methodology, as well as piping, piping components and piping systems. A comprehensive overview of valves is provided.

PETG 1088 - High Pressure Boilers II
This course offers an in-depth examination of boiler safety devices, boiler operations, water treatment and energy plant maintenance.

PETG 1089 - Safety, Codes, Environment
This course provides learners with an overview of the Power Engineering profession and the regulations by which it is governed. Relevant codes and standards are discussed, along with plant safety practices and procedures. The course also examines the relationship between the environment and plant operation, and covers methods used to monitor and control gaseous, solid, liquid, and noise pollutants.

PETG 1100 - Work Experience
The work experience component provides the learner with an opportunity to apply skills and concepts appropriate for entry level positions within the occupation. Learners will assess their own performance and be evaluated by an industry partner. Learners will identify personal outcomes they wish to attain during the work experience and will keep a journal.

PETG 1250 - Plant Communications I
This course offers an overview of communication skills required for work in a plant environment. You will practice reading and research techniques, interpret legal and procedural documents, analyze common drawings and sketches, and review the verbal and written communication skills necessary for work in the industry.

PETG 1251 - Plant Communications II
The fundamentals of clear, concise writing and presenting are reviewed and refined. You will develop skills in organizing, writing and presenting technical information along with career development skills and portfolio preparation. You will also learn how to collect appropriate work samples and documentation.

SAFE 1000 - Introduction to WHMIS (Workplace Hazardous Materials Information Systems)
This course offers learners basic overview of WHMIS principles and establishes a solid foundation to support workplace-specific training on the safe storage and handling of controlled/hazardous products. Upon successful completion of the course, students receive basic WHMIS certification.

SAFE 1001 - Introduction to NS OH&S Act
This course offers students an introduction to the Occupational Health & Safety (OH&S) Act of Nova Scotia, which is required by any person employed in a Nova Scotia workplace. This is a generic, introductory course that provides basic knowledge of the Act for students and is considered to be the basis from which more specific training can be given.

SAFE 1020 - Safety Basics – Restricted Spaces
The learner is introduced to the basic requirements and procedures involved with working in restricted spaces. The definition and potential hazards of restricted spaces are discussed The course material is infused throughout the curriculum and may be delivered in the classroom, shop or other opportunity as designed and developed by the instructor.

SAFE 1021 - Safety Basics – Hazard Identification
The learners are introduced to the types of hazards encountered in workplaces and the approach that should be followed when recommending and implementing appropriate controls. Two key elements of Hazard Identification are addressed: Hazard Assessment and Inspection. The Nova Scotia Occupational Health and Safety Act is discussed. The course material is to be infused throughout the curriculum and may be delivered in the classroom, shop or other opportunity as designed and developed by the instructor.

SAFE 1022 - Safety Basics – Working at Heights
The student is introduced to hazards and responsibilities concerned with working at heights in the workplace. Guardrails, travel restraints, roof work, fall arrest components will be discussed. The course material is to be infused throughout the curriculum and may be delivered in the classroom, shop or other opportunity as designed and developed by the instructor.

SAFE 1023 - Safety Basics – Lock-out Tag Out
Lock-out Tag Out introduces students to the hazards related to energized systems and procedures to ensure worker safety. Related legislation and risk management is discussed and the student is exposed to the various types of lock-out devices. The course material is to be infused throughout the curriculum and may be delivered in the classroom, shop or other opportunity as designed and developed by the instructor.

SAFE 1024 - Safety Basics – Respiratory Protection
This course introduces students to the potential of atmospheric hazards in the workplace and the available personal protection and control methods to maintain a safe work environment. Discussion topics include identification and testing for atmospheric hazards and workplace respiratory programs. The course material is to be infused throughout the curriculum and may be delivered in the classroom, shop or other opportunity as designed and developed by the instructor.

WORK 1100 - Workplace Mentoring I
This unit of instruction is designed to assist learners in managing their learning as an apprentice in the workplace. Learners will study their own experiences with learning new skills and identify their own learning preferences as an aid to developing learning strategies.

Apply Now

Learn more about this program

Share your details with us and we'll send you a program overview.

Required fields are marked with a red symbol (*)

Thank you for contacting us.

Your program overview is on the way. While you wait, feel free to browse our list of Programs & Courses or visit our Admissions information section.

Explore similar programs

To find other programs and career options that might be a good fit for you check out these areas of interest:

Top